AGP Picks
View all

What to tell your integrator before building a custom pick-and-place vision system

Oct. 29, 2026
What to tell your integrator before building a custom pick-and-place vision system
By AI, Created 20:05 UTC, Oct 29, 2026, AGP -

FIDER says automation teams need detailed part samples, optical specs, timing targets and communication protocols before building a custom pick-and-place vision system. The company says the goal is faster commissioning, fewer false rejects and more reliable robotic placement in production cells.

Why it matters: - Custom pick-and-place vision systems depend on real production data, not just CAD files. - Missing details can lead to lighting problems, calibration errors and commissioning delays. - Better upfront specifications help integrators tune vision, robot motion and inspection logic before factory acceptance testing.

What happened: - FIDER published guidance on what information buyers should give an automation integrator before a custom pick-and-place vision system is fabricated. - The guidance covers part samples, optical parameters, lighting, timing, calibration, communication and defect criteria. - The article says the systems are used in modern automated assembly cells to turn optical images into robotic motion coordinates. - The article is published from Shenzhen, Guangdong, China, on Oct. 30, 2026.

The details: - Buyers should provide physical samples from real production lots, not only 3D-printed prototypes or sterile CAD models. - Sample sets should include multiple material batches to capture resin color shifts and pigment density changes. - Sample sets should also include parts from multiple mold cavities to reflect parting line flash and gate vestige differences. - Integrators need parts with actual surface finishes and coatings, including matte sandblasting, reflective plating, anodizing and residual stamping oils. - Buyers should include out-of-spec boundary parts such as components with burrs, dents or slight warping so the system can test defect filtering thresholds. - Vision specifications should define the field of view, such as a 200 mm by 200 mm feeder plate or conveyor nest. - Teams should state the working distance between the lens and the part surface, including overhead frame beams and robot travel paths. - The required inspection accuracy should be explicit, whether the system needs ±0.1 mm guidance or ±0.01 mm to ±0.05 mm feature verification. - The guidance says five- to twelve-megapixel sensors paired with low-distortion telecentric lenses help eliminate parallax across the field of view. - Lighting choices should match part reflectivity, texture and color. - Transmitted backlighting can create sharp silhouettes for translucent feeder trays. - Polarized coaxial illumination can reduce specular reflections on shiny terminals and polished shielding cans. - Diffuse dome lighting can reduce shadows on curved stamped parts. - Specific LED wavelengths such as red, blue or infrared can improve contrast or reduce ambient daylight effects. - Timing budgets should be defined across the full vision cycle. - Image acquisition and strobe exposure are typically allocated two to five milliseconds. - Contour extraction and pattern matching are allocated fifteen to twenty milliseconds. - Coordinate transformation and communication output are allocated five milliseconds. - The total processing latency budget should stay within 20 to 30 milliseconds to match high-speed robotic cycle times. - Hand-eye calibration requires clear mounting geometry for overhead cameras, robot-wrist cameras or secondary in-flight cameras. - Calibration procedures should use precision dot grid plates to calculate pixel-to-millimeter scaling, distortion correction and rotational offsets. - Integrators should specify the fieldbus or link type, including Ethernet TCP/IP sockets, EtherCAT, PROFINET or RS232 serial links. - Data packet formatting should define coordinate strings, delimiter characters and handshake acknowledgement bits between the vision computer and PLC. - The article says FIDER standardizes coordinate hand-eye calibration protocols for plug-and-play communication between vision systems and Delta robotics, with repeatable placement accuracy of ±0.05 mm. - Defect criteria should define whether the camera only checks pickability or also inspects scratches, burrs, flashing or color variations. - Acceptance thresholds should use numerical tolerances rather than subjective language such as clean or smooth. - The article says false reject rates should be kept below 0.1%. - Reject handling should be specified in advance, including diversion to a quarantine bin or a secondary inspection cycle. - The article links to more information at engineering resources for integration consultation.

Between the lines: - The guidance frames vision integration as a systems problem, not just a camera-selection problem. - The emphasis on real samples, latency and protocol details suggests that many deployment failures come from mismatched assumptions between engineering teams and automation vendors. - The article also positions calibration and communication standards as key to repeatable factory performance, not just initial setup.

What's next: - Buyers preparing a custom pick-and-place project are expected to gather representative parts, define optics and set performance thresholds before integration starts. - The article points readers to FIDER’s consultation resources for further specification review.

The bottom line: - The more a buyer defines upfront, the less guesswork the integrator has later.

Disclaimer: This article was produced by AGP Wire with the assistance of artificial intelligence based on original source content and has been refined to improve clarity, structure, and readability. This content is provided on an “as is” basis. While care has been taken in its preparation, it may contain inaccuracies or omissions, and readers should consult the original source and independently verify key information where appropriate. This content is for informational purposes only and does not constitute legal, financial, investment, or other professional advice.

Sign up for:

The Global Jobs Bank

The daily local news briefing you can trust. Every day. Subscribe now.

By signing up, you agree to our Terms & Conditions.

Share this page:

Advanced Search Options

Search for:

Search scope:

Type:

Search in:

Date range:

The last

Sort by:

Sign up for:

The Global Jobs Bank

The daily local news briefing you can trust. Every day. Subscribe now.

By signing up, you agree to our Terms & Conditions.